NSE8-01 / Ø8 mm flow control regulator with R1/8" thread

Ø8 mm push-in 90° flow control valve with R1/8" thread.

The NSE8-01 flow control regulator controls the air flow rate from the duct. On the inlet side, the air flow can be adjusted by a screw with a knob, which can be locked in the set position by a locking nut.
A push-in system release ring helps to easily connect or disconnect tubing by hand without tools, and the threaded side is used to connect a 1/8" inside diameter work cylinder or other pneumatic receiving system component.
The NSE8-01 flow control regulator valve is supplied with a teflon thread seal on the threaded end and is supplied ready for immediate installation.
The use of a flow control valve greatly contributes to maximising the life of the connected working cylinder, thereby reducing costs by extending the replacement period. Their use is highly recommended for almost all pneumatic systems.

Operating medium: compressed air, vacuum
Maximum pressure: 10 bar
Operating temperature: 0°C to +60°C